Getting a CS globe valve order right first time
Most enquiries for CS globe valves in India arrive as a one-line item: size, class and "CS". That is rarely enough. A globe valve has more variables than a gate or ball valve – disc type, seat design, bonnet, operator – and each affects price, delivery and how the valve behaves in service. Use the checklist below to make your enquiry complete; it also helps when comparing offers.
Step-by-step specification checklist
| # | Parameter | What to state | Controtek range |
|---|---|---|---|
| 1 | Size | Nominal bore | 50NB–400NB (cast); 15NB–50NB (forged) |
| 2 | Pressure class | ASME class or design pressure/temperature | Class 150–1500 (cast); 800/1500/2500 (forged) |
| 3 | Body material | e.g. A216 WCB, A352 LCB, A105 | WCB/WCC, LCB/LCC, WC1–WC12, A105, F11/F22 |
| 4 | Trim | Seat/disc/stem material | 13% Cr (F6) standard; others on request |
| 5 | Disc type | On-off, parabolic or control | All three |
| 6 | Bonnet | Bolted or pressure seal | Both; OS&Y |
| 7 | Ends | RF, RTJ, BW (with schedule), Victaulic | All four; SW/threaded on forged |
| 8 | Operation | Handwheel, gear, electric, hydraulic | All four |
| 9 | Testing | API 598 / BS 6755, any extra NDT | As specified |
| 10 | Documents | EN 10204 3.1 or 3.2, TPI agency | Both certificate types |
Standards commonly specified in India
Indian EPC and plant specifications for cast steel globe valves usually call for BS 1873 design (or DIN 2401 for European-origin plants) with testing to API 598 or BS 6755. Flange dimensions generally follow ASME B16.5 and face-to-face dimensions ASME B16.10. Small-bore forged globe valves are specified to API 602.
What affects the price of a CS globe valve
- Pressure class – wall thickness and bolting rise steeply above Class 300.
- Bonnet type – pressure seal bonnets cost more but save weight at high class.
- Trim – hard-facing or special alloys add cost but extend life in erosive service.
- Operator – gearboxes and electric actuators can exceed the valve cost on large sizes.
- Inspection scope – third-party witness, extra NDT and 3.2 certificates add time and cost.
Inspection and documentation
Controtek supplies every valve with an EN 10204 type 3.1 or 3.2 test certificate. Castings are inspected to ASTM at source, and castings and forgings are subjected to NDT and DT according to the material standard. Third-party inspection agencies nominated by the customer are welcome at the Ahmedabad works.
Technical specification
| Size range | 50NB to 400NB (2" to 16") |
|---|---|
| Pressure class | ASME Class 150 to Class 1500 |
| Design standard | BS 1873 / DIN 2401 |
| Inspection & testing | BS 6755 / API 598 |
| Bonnet / type | OS&Y, bolted bonnet, pressure seal bonnet |
| Disc | Swivel disc – on-off, parabolic or control type |
| Seat | Seal welded or threaded-in seat rings |
| End connections | Flanged RF, RTJ, butt weld (BW), Victaulic |
| Operation | Handwheel, manual gear, electric actuator, hydraulic |
| NDT | As per customer requirement |
| Certification | Third party / customer / Controtek QC; EN 10204 3.1 or 3.2 test certificate |
For material background read carbon steel globe valves. For an overview of the full range, see the globe valve page.



